Indians For Guns

Hi everyone!

Can someone guide me to any gunsmith in Mumbai who can repair an IZH 46 M .177 caliber Air Pistol? Yesterday at the range, I encountered a gradual loss of pressure and a change in sound and the point of impact continued a downward trend despite adjusting the sights upwards. The last couple of shots did not even penetrate the paper. Could it be the seal or something else?

Thanks

May be worthwhile contacting the people at Preciohle to see if they know someone who can do this? Or the range people in Mumbai?

https://www.preciholesports.com/contact

Thanks for the prompt response. Precihole said they do not undertake any third party weapon repair. But I did manage to find someone who has repaired the Baikal before.

Usually it'll be the O rings, these are nitrile and will wear out and deteriorate with time/ use.

Often what can help is to lubricate them with silicone oil/ grease which can often recondition them well enough to stretch out their life further.

In fact, for all PCP's/ pneumatics, one should service the seals regularly for maximum life, there's enough info on this online.

Worst case, you need to replace the O rings, they literally cost pennies, so buy spares and keep them handy (but ziplocked in plastic with a generous dose of silicone oil).

When you get your IZH repaired, do oversee the operation. It's not rocket science, this will give you an opportunity to learn and understand your air pistol better, so you can do it yourself in a pinch.

Hi Mundaire,

Thanks for an elaborate response!

I did oversee the operation of my Baikal being dismantled and the change of what is referred to as 'the pistol seal' (Ser 5) in the attached diagram. Unfortunately, this operation didn't rectify the problem, in that the requisite pressure didn't build up. The culprits seem to be part no 31(valve seat) and 35 (O -ring), correctly identified by you as the usual cause of this problem. The Air Pistol is of 2008 vintage and I got it just a couple of years back and have fired about 1000 pellets.

Unfortunately, what came with this pistol, are only the two breach seals and the pistol seal and no one seems to have any other spares. It would be great if any one on this forum could guide me in this regard.

As this repair is likely to be time consuming, I was planning on graduating to a PCP. Most shooters seem to be using a Morini or a Steyr; I believe FWB P8X is also a good new entrant. Although Precihole PX 50 Match Pro is the cheapest of the lot, I haven't come across any reviews for it. Your views on this are welcome.

Regards

If you know the size of the O ring, you can get replacements from a plethora of local industrial suppliers (try Indiamart as a starting point), as these are used across industries in a variety of applications.

You could also, buy from overseas, but that will take time and cost a lot more.

Unfortunately, the size is not mentioned anywhere in the manual. But finding it out somehow would be a good start point.

Thanks

AVIATOR275 wrote: ↑

Fri Feb 26, 2021 1:42 pm

Unfortunately, the size is not mentioned anywhere in the manual. But finding it out somehow would be a good start point.

Thanks

Just get a pair of calipers and measure the o rings, for further confirmation search the net....

A quick google search, found a eBay link for spares. Do check sellers rating before deciding to buy.. there are few other sellers also..

https://www.ebay.com/itm/O-rings-Baikal ... 971?_ul=IN

Also you can try writing to Baikal directly.

https://www.baikalinc.ru/
The website is in Russian language, you can use a translator.

This pistol shares spare part with Baikal MP-532 which is still in production.

If you are Mumbai based try contacting Pramod from pcpshop.

My experience if dealing with him has been super.

Sent from my SM-G950F using Tapatalk

Thank you all for the valuable inputs. I just ordered the spares on https://airpro.ecrater.com/ and am hoping for the best.

I've bought a few seals and O rings from them over the years...
https://spares.bagnallandkirkwood.co.uk ... ategories/

Thanks Shivi. I shall keep this ref as well for the future.