Indians For Guns

Particularly Indian ARs suffer from loosening of front globe sight due to vibration.
At times it confuses shooter about his ability.
In general it is advised to unscrew the globe screw and wrap some thread and then again screw it as per required height.
But the thread can not sustain the pressure for long.
Here is a permanent solution.
Tighten the globe screw as per required height.
Make the area of oil/Grease free and do soldering properly.
Cost - Rs. 5/-
This is a permanent solution.
Please see the fotos.

Basu

Thats true Basu da, it is an issue with the adjustable globe sight.
As an alternate solution I wrap it with plumbing tape and tighten the screw.

Regards
dh

Best is to wrap cotton on the globe thread..then on drop of Fevifit 30 on threads , tighten as per length required.
Allow it to cure for 24 hrs.
But unfortunately Fevifit 30 is not available in hardware stores.

Basu

You could also try removeable threadlock such as Loctite 243 or nail polish varnish, after degreasing all the concerned threads.

Wow, nail polish varnish is something new.

Regards
dh

Provided the front sight housing is metallic, you can also use hot melt glue.

I use it for fixing aluminium inserts to aluminium arrow shafts. http://indiansforguns.com/viewtopic.php?f=20&t=13632

Sticks of hot melt glue are available at hardware shops.

What is the chalu name of hot melt glue..?
It looks like "Gala".....

Basu

Nope, Basu da you will get this at BBD bag street vendor . Its like gel stick.

Regards
dh

Ha..Ha...Ok, I will get my child to give me a picture of her hot glue gun and gum sticks...and post it for your eyes, basu da!!
The thing should work good to hold the front sight globe though. Never thought of it. Great suggestion that!
Regards,
Prashant