Hai Guys,
I dont know wheather this is the right place to post this work, I was very much impressed by the stock on the Briha ji air rifle "samurai"
I tried to do a customizing work on my IHP Air rifle stock, Before that as a trial I tried it on a ISW Stock.
First I tried to thin the grip area and added a adjustable cheek piece on the stock. Pics are added Below.
Now the main part: Checkering comes into play.
I searched a lot of shop for getting a checkering tool, but all my efforts were in vain. So decided to do a checkering pattern by myself.
My plan was a childish plan to do this job but at last gave me some results.
I used two Flat Screw Drivers (A very thin one and A bit Bigger one) ,to make the lines and then used a small hacksaw Blade to clear the spacing between the lines.
And the Pics are added below. Please share your views on my work.
Stock Work:
Checkering:
Re: Custom Checkering and modification on Stock.
Posted: Sun Aug 25, 2013 2:25 am
by Kumarnishith
Sathya.sniper...I am really impressed It is a pretty tough technique to master and require specialized tools to do the job...The lines have come out pretty nicely..eagerly waiting for the final result (post polishing/finishing etc). All the best & keep up the good work
-Nishith
Re: Custom Checkering and modification on Stock.
Posted: Sun Aug 25, 2013 11:58 am
by sathya.sniper
Thanks Kumarnishith, I am working on the polishing work will post results soon as possible.
Re: Custom Checkering and modification on Stock.
Posted: Sun Aug 25, 2013 3:50 pm
by GNV
Pretty good for a first attempt that too with a hacksaw blade. well done.
Re: Custom Checkering and modification on Stock.
Posted: Sun Aug 25, 2013 4:23 pm
by brihacharan
Hi Sathya,
Excellent DIY attempt....
Very professional looking job of checkering - Now polishing will enhance the look & feel of the stock.
Frankly you have achieved something enviable just by using "A couple of screwdrivers & a hacksaw blade" - while the world relies on sophisticated checkering tools
Your basic engineering funda is visible by the pencil sketches made on the stock prior to attempting the job
Just goes to prove that imagination, innovation & application and ofcourse hardwork / dedication are the keys to producing pathbreaking results.
Well done - Congrats
Briha
Re: Custom Checkering and modification on Stock.
Posted: Sun Aug 25, 2013 9:27 pm
by bennedose
Very good. My compliments!
Re: Custom Checkering and modification on Stock.
Posted: Sun Aug 25, 2013 10:48 pm
by sathya.sniper
Thank you everyone for your encouraging words..... Actually after finishing it i was wondering is it worthy enough to post it on this forum, But Brihaji was the one who told me that it must be posted on the forum, So a special thanks for you sir.
Regards.
Re: Custom Checkering and modification on Stock.
Posted: Sun Aug 25, 2013 11:55 pm
by Ganesh TT
Pretty decent work you done for your stock...nearly really looks like carving done through laser....Good
Re: Custom Checkering and modification on Stock.
Posted: Mon Aug 26, 2013 10:04 am
by Basu
What a work !!
Simply awesome.....
Kudos
Basu
Re: Custom Checkering and modification on Stock.
Posted: Mon Aug 26, 2013 10:08 am
by Basu
What a work !!
Simply awesome......
Kudos
Basu
Re: Custom Checkering and modification on Stock.
Posted: Mon Aug 26, 2013 10:51 am
by essdee1972
Great work, buddy!! A pair of screwdrivers and a hacksaw blade!! Awesome! How did you make the cheek piece, anyway?
Re: Custom Checkering and modification on Stock.
Posted: Mon Aug 26, 2013 11:30 am
by najad
good work sathya
Re: Custom Checkering and modification on Stock.
Posted: Mon Aug 26, 2013 12:19 pm
by ckkalyan
WOW! Nice work and initiative sathya.sniper,
Brilliant results for a first time effort with very basic tools - very innovative usage of what's available! I can only imagine your perseverance and patience achieving the final effect?! Kudos!
Wish you all the best!
Re: Custom Checkering and modification on Stock.
Posted: Mon Aug 26, 2013 1:41 pm
by brihacharan
essdee1972 wrote:
Great work, buddy!! A pair of screwdrivers and a hacksaw blade!! Awesome! How did you make the cheek piece, anyway?
essdee,
See Sathya's earlier post with pictures of the procedure in making the "Cheek Piece" - Very interesting!
Briha
Re: Custom Checkering and modification on Stock.
Posted: Mon Aug 26, 2013 1:48 pm
by sathya.sniper
brihacharan wrote:
essdee1972 wrote:
Great work, buddy!! A pair of screwdrivers and a hacksaw blade!! Awesome! How did you make the cheek piece, anyway?
essdee,
See Sathya's earlier post with pictures of the procedure in making the "Cheek Piece" - Very interesting!
Briha