Indians For Guns

hello members i need help regarding my old ihp springer is loosened so i want to install a new spring in it can any one suggest i can find a good spring or mention any place i can find them any good company make good spring which can fit in my rifle do all air rifles have same spring

Yesterday , i change my old airgun's [not ihp , a local company made named Hunt -R / Star ) spring.
The gunsmith gave me the CHEROKEE airgun spring , he said that it is good.
It's cost INR 270.
& now it is working well.


BUT , IN THE CASE OF IHP , I Think you can contract with any Ihp dealar or a good gunsmith.

Cherokee or Gsmith try one of them but also change the washer while you'r at it.
there are different spring dimensions for different models - Model 25, 27, 35 etc. since you have a mod 35 pick up a mod 35 spring.
/S/

any good gunsmith in kolkata who 's work is good

snIPer wrote:Cherokee or Gsmith try one of them but also change the washer while you'r at it.
there are different spring dimensions for different models - Model 25, 27, 35 etc. since you have a mod 35 pick up a mod 35 spring.
/S/

my gunsmith also change the washer.
He is not only a gunsmith aslo he has a small factor to produce airgun. .

friend,
try target tune you will get lot of spares to make your gun competitive.
regards
dr.jk

dr.jayakumar wrote:friend,
try target tune you will get lot of spares to make your gun competitive.
regards
dr.jk

you can buy a tune kit too

bro being u r in kolkata check whether aimco will do the service who is the direct dealer of ihp

amarjitaldakgp123 wrote:hello members i need help regarding my old ihp springer is loosened so i want to install a new spring in it can any one suggest i can find a good spring or mention any place i can find them any good company make good spring which can fit in my rifle do all air rifles have same spring

Dear amarjitaldakgp123,
Not quite clear on what you meant by your "springer is loosened". Is there a play in the trigger making it loose ? Or does the pellet not fly off as desired ? If former, then a small trigger spring (akin to one in old ball pens) placed or replaced ought to solve your problem. Else check on breech seal. If gone - replace that with a leather seal (tough to get and tougher to set) or a suitable synthetic O-ring. That ought to solve your problem in second case. However, if it is OK, only then go for innards - i.e. piston seal or replacing the spring if need be and getting the gun tuned etc. Do reading on the vast material on gun tuning on our forum - that way you know what to ask the gunsmith and he does not take you for a ride. Good Luck.

@airgun_novice

yes pellet not fly off as desired thats the problem with my air rifle