Indians For Guns

dear members please post views on powder coating upperside of barrels.

brother, you are defiantly going to make your o/u or sxs to 2 single barrel guns. world over 90% TIN + 10% SILVER is used to join barrels+ Ribs , which will easily vanish when you heat barrels at 180 DEG before spraying powder coat .

rp,

aaaaaah that is a nice one inever new ihad to get it heated that much before the coating....thanks bro..what about cold bluing..if you know the process please help iwill be grateful..regards

try to get perma blue from gunhouse(S) rest read directions to apply on bottle it self.N0 rocket technology.
rp,

well...fancy modern commercial cold blue and classic rust blue and brown are about the only useful chemical finishes that can be practically applied on most doubles... the latter two being obviously more durable. The industrial standard caustic hot blue will chemically devour solder in a matter of moments and the resulting mess is far beyond 'oops'.

Adding a wee bit of potassium cyanide to the caustic mixture will generally prevent catastrophic caustic/solder reaction...but hey..we're talking potassium cyanide.... LTTE grade. Not something you or anyone should be fooling around with whether with extreme care or even in extremely wee quantities ...For a slightly more detailed warning read my next post.

Commercial cold blue if done with a lot of care and patience will produce good results but it isn't as durable and hard wearing as rust blue....


regards,
cc

dear CC

Please rephrase that sentence re KCN to make it sound more dangerous and less useful for guns.Many DIY jokers on the internet. I hope no ones uses this tip.
One can never be careful even if the quantity is in milligrams.

thanks all members everything considered safety first atleast onething for sure cold bluing is not dangerous for humans and the gun

hornet wrote:thanks all members everything considered safety first atleast onething for sure cold bluing is not dangerous for humans and the gun

...ah! got you there again ... commercial cold blue invariably contains selenium dioxide .... poison.... meaning you handle things with care there too.

have fun!

Regards,
cc

hi,
All not all gunsmits in punjab are using KNC in hot caustic.

cold rust blue is more durable but the mixture for bluing agent is made according to the climate and season other wise ... after blued done u say
ISSEY TO PEHLE HI THEIK THI ...