NEW DIN ADAPTER DESIGN & QUICK FILL SOLUTION
-
- Learning the ropes
- Posts: 37
- Joined: Fri Oct 31, 2008 8:18 pm
- Location: Mumbai
NEW DIN ADAPTER DESIGN & QUICK FILL SOLUTION
Have been yearning to design a scuba or scba tank din fill setup for pcp fill solutions.
Came up with the below design and following features.
Features :
a) Machined out of Solid Steel and these fittings are not just forged fittings like most available in the market. Engineered and manufactured out of utmost precision.
b) Non corrosive fittings (Never bother about rust)
c) Rated to Working pressure of 350 BAR. Fittings can withstand 12000 PSI and above. However o-rings are rated to give away beyond 350 bar (safety feature)
d) BSP fittings so you can attach a hose or a quick disconnect (shown in pic) or attach most fill probes available in the market. Users who own Dominator/Steyr/LG/HW and many more would not require any hose options, just attach the fill adapter to the 1/8 bsp end and get started.
e) Least wastage of air while bleeding the air, post fill due to its compact complete portable design.
f) Silent bleed port design.
g) Gauge available in 300 bar for those who need it for their 300 bar tanks. Version shown in pic is for tanks rated to 200 bar
h)Compact to carry in the field and low maintenance.
Actual Pictures of the finished product.
Regulator is next.......
Special thanks to our forum members for their help support and motivation without which this would not have been possible...
Until then...Happy Safe Shooting
Came up with the below design and following features.
Features :
a) Machined out of Solid Steel and these fittings are not just forged fittings like most available in the market. Engineered and manufactured out of utmost precision.
b) Non corrosive fittings (Never bother about rust)
c) Rated to Working pressure of 350 BAR. Fittings can withstand 12000 PSI and above. However o-rings are rated to give away beyond 350 bar (safety feature)
d) BSP fittings so you can attach a hose or a quick disconnect (shown in pic) or attach most fill probes available in the market. Users who own Dominator/Steyr/LG/HW and many more would not require any hose options, just attach the fill adapter to the 1/8 bsp end and get started.
e) Least wastage of air while bleeding the air, post fill due to its compact complete portable design.
f) Silent bleed port design.
g) Gauge available in 300 bar for those who need it for their 300 bar tanks. Version shown in pic is for tanks rated to 200 bar
h)Compact to carry in the field and low maintenance.
Actual Pictures of the finished product.
Regulator is next.......
Special thanks to our forum members for their help support and motivation without which this would not have been possible...
Until then...Happy Safe Shooting
Regards,
Pramod P
-----Being on par in terms of price and quality only gets you into the game------
--------------------Service wins the game---------------
Pramod P
-----Being on par in terms of price and quality only gets you into the game------
--------------------Service wins the game---------------
- kshitij
- Shooting true
- Posts: 759
- Joined: Wed Jun 04, 2014 5:22 pm
- Location: Navi Mumbai
Re: NEW DIN ADAPTER DESIGN & QUICK FILL SOLUTION
Pramod, the component looks sturdy and well made. Congratulations
Lock, Stock and Barrel.
-
- Veteran
- Posts: 1174
- Joined: Wed Nov 20, 2013 10:41 pm
Re: NEW DIN ADAPTER DESIGN & QUICK FILL SOLUTION
Great and a very useful product. Well done and all the best.
Regards
Atul
Regards
Atul
-
- Learning the ropes
- Posts: 37
- Joined: Fri Oct 31, 2008 8:18 pm
- Location: Mumbai
Re: NEW DIN ADAPTER DESIGN & QUICK FILL SOLUTION
Thanks Kshitij and Atul.
And I must confess, I keep reading posts, as I travel but get so tied up with work so I don't chime in much.
Kshitij : I get to chat as we met for the offline event but post that is totally into knives.
Atul : I love reading your cowboy stories.
Am naïve when it comes to knives, firearms and springer's, then I guess there's not much left to talk about anything...
And I must confess, I keep reading posts, as I travel but get so tied up with work so I don't chime in much.
Kshitij : I get to chat as we met for the offline event but post that is totally into knives.
Atul : I love reading your cowboy stories.
Am naïve when it comes to knives, firearms and springer's, then I guess there's not much left to talk about anything...
Regards,
Pramod P
-----Being on par in terms of price and quality only gets you into the game------
--------------------Service wins the game---------------
Pramod P
-----Being on par in terms of price and quality only gets you into the game------
--------------------Service wins the game---------------
- ibalajis
- One of Us (Nirvana)
- Posts: 259
- Joined: Tue Dec 30, 2014 2:30 pm
- Location: Chennai
Re: NEW DIN ADAPTER DESIGN & QUICK FILL SOLUTION
Seems to be a great work Pramod... Well done.
- kshitij
- Shooting true
- Posts: 759
- Joined: Wed Jun 04, 2014 5:22 pm
- Location: Navi Mumbai
Re: NEW DIN ADAPTER DESIGN & QUICK FILL SOLUTION
Buddy, you should share details of your air guns. Bet that will generate a lot of discussionspramodsid wrote:Thanks Kshitij and Atul.
And I must confess, I keep reading posts, as I travel but get so tied up with work so I don't chime in much.
Kshitij : I get to chat as we met for the offline event but post that is totally into knives.
Atul : I love reading your cowboy stories.
Am naïve when it comes to knives, firearms and springer's, then I guess there's not much left to talk about anything...
I am still very much into plinking. Unfortunately the heat in the past couple of months kept me indoors during the weekends and i ended up keeping myself busy working on a few knives and other stuff whenever i found some free time.
That aside, i for one am eagerly looking for more products and solutions to come from you. Keep us posted
Lock, Stock and Barrel.
- ckkalyan
- Veteran
- Posts: 1484
- Joined: Sat May 29, 2010 10:37 pm
- Location: British Columbia, Canada
- Contact:
Re: NEW DIN ADAPTER DESIGN & QUICK FILL SOLUTION
Amazingly well crafted piece of equipment pramodsid - well done! Simply beautiful (even gauging from just, the images) - very solid construction!
Hey aadhaulya - what cowboy stories - so who has been hiding the cowboy stories?!
I would love to hear them as well!
Hey aadhaulya - what cowboy stories - so who has been hiding the cowboy stories?!
I would love to hear them as well!
When guns are outlawed, only outlaws will have guns!
- brihacharan
- Old Timer
- Posts: 3112
- Joined: Fri Jan 22, 2010 3:33 pm
- Location: mumbai
Re: NEW DIN ADAPTER DESIGN & QUICK FILL SOLUTION
Hi Pramod,
Wonderful workmanship with precision
Keep them coming bro....
Cheers
Briha
Wonderful workmanship with precision
Keep them coming bro....
Cheers
Briha
-
- Learning the ropes
- Posts: 37
- Joined: Fri Oct 31, 2008 8:18 pm
- Location: Mumbai
Re: NEW DIN ADAPTER DESIGN & QUICK FILL SOLUTION
Thanks Balaji, CK and Briha for the positive words.
Just have to hunt for time.
As promised, just finished the regulator and have posted the same.
Design of many more in progress but the reg was something I have been working upon for months.
Many more to come, just hope the hobby doesn't get killed, all these innovations will be hard to pursue.
I know there are so many senior and newer members fighting for the cause. I have and will continue to contribute in any way I can.
Sure mate will click some pictures and have a write up (new post) on that too before it goes, been asked for already.kshitij wrote:Buddy, you should share details of your air guns. Bet that will generate a lot of discussions
I am still very much into plinking. Unfortunately the heat in the past couple of months kept me indoors during the weekends and i ended up keeping myself busy working on a few knives and other stuff whenever i found some free time.
That aside, i for one am eagerly looking for more products and solutions to come from you. Keep us posted
Just have to hunt for time.
As promised, just finished the regulator and have posted the same.
Design of many more in progress but the reg was something I have been working upon for months.
Many more to come, just hope the hobby doesn't get killed, all these innovations will be hard to pursue.
I know there are so many senior and newer members fighting for the cause. I have and will continue to contribute in any way I can.
Regards,
Pramod P
-----Being on par in terms of price and quality only gets you into the game------
--------------------Service wins the game---------------
Pramod P
-----Being on par in terms of price and quality only gets you into the game------
--------------------Service wins the game---------------
- Chengy
- Almost at nirvana
- Posts: 116
- Joined: Tue Jul 28, 2015 11:56 am
- Location: Delhi
Re: NEW DIN ADAPTER DESIGN & QUICK FILL SOLUTION
Looks beautiful and am sure will perform just as well. Is it possible to obtain one of these commercially?