Indians For Guns

As i was not satisfied with the performance of first knife (blade material was not good) i decided to make another one from an old unused rusty knife which was made out of spring steel. i started the work by softening it to work with hand tools, then i cut it with hacksaw and then using files i shaped it to desired design. (in the beginning the metal was not soft enough and one file got damaged,its was a cheap Chinese file and i got material for my third knife , so i again soften it) after filing i sanded the surface with 80 grit sandpaper to removed irregularities in surface and made the handle with teak wood.
here is the picture of my second knife after one one week i made my third knife with metal file after this i decided to copy a swamp rat knife and i bought an angle grinder to make my works more easy . it saved lot of time in my work on fourth knife with spring steel

original knife mine
https://lh4.googleusercontent.com/-vTtY ... knife1.JPG
https://lh5.googleusercontent.com/-R7Q0 ... knife2.JPG
https://lh6.googleusercontent.com/-jG5t ... knife3.JPG
https://lh5.googleusercontent.com/-g89c ... knife4.JPG
https://lh6.googleusercontent.com/-8xWG ... knife5.JPG

my next knife would be a folding knife