Suggestions for a take-down recurve bow required.

All Things Sharp and Pointed: compound and crossbows, knives and swords.
Post Reply
User avatar
Mark
Veteran
Veteran
Posts: 1147
Joined: Sat Jun 03, 2006 10:37 am
Location: Middle USA

Re: Suggestions for a take-down recurve bow required.

Post by Mark » Sat Sep 13, 2008 9:11 pm

http://search.ebay.com/search/search.dl ... category0=

Quite a few choices and prices, just how to figure out shipping.

Plus, if there is nothing at the moment you are interested in check back in a few days.
"What if he had no knife? In that case he would not be a good bushman so there is no need to consider the possibility." H.A. Lindsay, 1947

For Advertising mail webmaster
TenX
Veteran
Veteran
Posts: 1902
Joined: Sun Sep 30, 2007 3:19 pm
Location: Bangalore, INDIA
Contact:

Post by TenX » Sat Sep 13, 2008 9:49 pm

archer";p="52342 wrote: ...while ordering arrows make sure the arrow is atleast 2 inches longer than the draw length of the bow. for 40lbs i think u will need a draw length of atleast 26-28inches for a man of normal height.

regards
Parag
I checked this site ( http://www.merlinarcherycentre.co.uk/re ... jargon.htm ) to measure the draw length. They have have some tit bit info for beginners.
Parag,
is that link good for beginner's knowledge.
Also, GSmith has some stuff for sale in India. Are they any good, considering there will be no customs problems...
Never Shave without a Blade
.......^___________________^
....../ '---_________________ ]
...../_==O;;;;;;;;_______.:/
.....),---.(_(____)/.....
....// (..) ),----/....
...//____//......
..//____//......
.//____//......
..-------

Mack The Knife
We post a lot
We post a lot
Posts: 5775
Joined: Mon May 22, 2006 6:23 pm

Re: Suggestions for a take-down recurve bow required.

Post by Mack The Knife » Sat Sep 13, 2008 11:44 pm

The provision of the blade length and width pertained to exclusion from the the provisions of the Arms Act.
Are you saying that we needed or did not need an arms licence for blades with a length over 9" and width over 2"?
In fact it is only now that the import has been made free.Earlier even the import of arms of category 9307 was restricted.
Thanks for clarifying that.

Mack The Knife
We post a lot
We post a lot
Posts: 5775
Joined: Mon May 22, 2006 6:23 pm

Re: Suggestions for a take-down recurve bow required.

Post by Mack The Knife » Sat Sep 13, 2008 11:55 pm

Naga, herewith a couple of more memories. That particular bow's string was nothing but nylon clothes line and the bow used to creak when drawn. Do you still think it's the same as what the Mizos use? If I can get one of those and a bunch of arrows to go with it, I wouldn't be interested in buying an imported one. Thanks. P.S.: Regarding target bosses (the jute one's), they are available in Bangalore. Let me know which size you are interested in and I can ask my friend to look them up as he stays close to the shop.

Mark and Anand, thanks for the links but if those Mizo bows are still available then that is all I will want. Failing which, I will have to butter-up GG to use his PayPal account on ebay. :mrgreen:

User avatar
archer
One of Us (Nirvana)
One of Us (Nirvana)
Posts: 325
Joined: Wed Apr 04, 2007 10:15 pm
Location: Los Angeles/Mumbai

Post by archer » Sun Sep 14, 2008 12:07 pm

Mack The Knife,
25K is a very good budget to have. you should be able to find a very good TD recurve bow and a set of arrows. i havent bought a bow n arrows over the net for almost 5 yrs. need to hunt for my books. will get back to you asap.

tenx,
gsmtih does not mention the brand or any draw length etc of the bow. neither do they mention the does, so i cannot comment on how good they are. but they do look very good.

naga
for a target board, i use hitlon material. cut them into strips of 1 feet and roll them up to the size of ur choice. its easier to make and lighter to mave around. it is strong and can use a rope to mount it on a borad or peg it to the ground. i made mine in 2002, still going strong. i used 10mm hitlon and it take my arrows from my 35lbs compund bow without a problem.

regards.
Parag
Yeh dil maange more.....!!!

User avatar
archer
One of Us (Nirvana)
One of Us (Nirvana)
Posts: 325
Joined: Wed Apr 04, 2007 10:15 pm
Location: Los Angeles/Mumbai

Re: Suggestions for a take-down recurve bow required.

Post by archer » Sun Sep 14, 2008 12:13 pm

marlin arhery is a very good site. if you want i can send you a booklet that i downloaded from the internet. it has all the info on archery right from bows/arrows rules and techniques. PM me ur address i can send you a copy.
Yeh dil maange more.....!!!

User avatar
nagarifle
Old Timer
Old Timer
Posts: 3404
Joined: Sat Oct 06, 2007 1:43 pm
Location: The Land of the Nagas

Post by nagarifle » Sun Sep 14, 2008 12:16 pm

hi Parag
thanks for the info. just what is hitlon? and where can one get that? in my area may not be possible. any chance to post a pic of ur board? just to get a better idea.

thanks mate
Nagarifle

if you say it can not be done, then you are right, for you, it can not be done.

User avatar
archer
One of Us (Nirvana)
One of Us (Nirvana)
Posts: 325
Joined: Wed Apr 04, 2007 10:15 pm
Location: Los Angeles/Mumbai

Post by archer » Sun Sep 14, 2008 12:29 pm

hitlon is a packaging material. it comes in black and white colour. you get it most of the stores that stock upholstery. it come in 5mm, 8mm, 10mm, 12mm etc. will try and upload a pic of my borad.
Yeh dil maange more.....!!!

Mack The Knife
We post a lot
We post a lot
Posts: 5775
Joined: Mon May 22, 2006 6:23 pm

Post by Mack The Knife » Sun Sep 14, 2008 7:10 pm

Parag,

I am in no hurry, so take your time.

Will PM you my address in a tick.

Thanks.

TenX
Veteran
Veteran
Posts: 1902
Joined: Sun Sep 30, 2007 3:19 pm
Location: Bangalore, INDIA
Contact:

Re: Suggestions for a take-down recurve bow required.

Post by TenX » Sun Sep 14, 2008 7:17 pm

archer";p="52440 wrote: marlin arhery is a very good site. if you want i can send you a booklet that i downloaded from the internet. it has all the info on archery right from bows/arrows rules and techniques. PM me ur address i can send you a copy.
Parag.. Is it Marlin Archery or Martin Archery?
Never Shave without a Blade
.......^___________________^
....../ '---_________________ ]
...../_==O;;;;;;;;_______.:/
.....),---.(_(____)/.....
....// (..) ),----/....
...//____//......
..//____//......
.//____//......
..-------

User avatar
kanwar76
Eminent IFG'an
Eminent IFG'an
Posts: 1861
Joined: Tue Jun 06, 2006 7:00 pm
Location: Bang-a-lure
Contact:

Re: Suggestions for a take-down recurve bow required.

Post by kanwar76 » Sun Sep 14, 2008 7:24 pm

Rusty,

Take a look here.. http://www.blackwidowbows.com/

Been on my wishilst since long :). Heard few good things about them so may be they are worth a look

-Inder
I am the Saint the Soldier that walks in Peace. I am the Humble dust of your feet, But dont think my Spirituality makes me weak. The Heavens will roar if my Kirpan were to speak...

Mack The Knife
We post a lot
We post a lot
Posts: 5775
Joined: Mon May 22, 2006 6:23 pm

Post by Mack The Knife » Sun Sep 14, 2008 8:19 pm

Bloody marvelous aren't they? There's one in Bangalore or they used to be one. Single piece though.

What got me thinking about archery again was our trip to Pran's place. That empty land at the back is just right for some safe practice.

User avatar
nagarifle
Old Timer
Old Timer
Posts: 3404
Joined: Sat Oct 06, 2007 1:43 pm
Location: The Land of the Nagas

Post by nagarifle » Sun Sep 14, 2008 8:50 pm

Mack The Knife Bana";p="52488 wrote:
What got me thinking about archery again was our trip to Pran's place.
ha ha more like you are going back to your second childhood, eh robin hood, ROTFL
every thing is safe and sound as long as you don't dress up in stockings ROTFL ROTFL and make marry with you friends. or else have to send out the shirfe of nooitngham(Eljefe) with nice white jacket with the zip at the back kind. ROTFL ROTFL can i join your marry band in tights? :D
Nagarifle

if you say it can not be done, then you are right, for you, it can not be done.

User avatar
HSharief
Shooting true
Shooting true
Posts: 568
Joined: Tue May 23, 2006 6:11 pm
Location: Misriganj

Post by HSharief » Sun Sep 14, 2008 9:53 pm

Mack The Knife, for the budget you have quite a few options. I'm sure you can even make one yourself. Lots of plans online. Googled a few that I saw last time.

http://www.vintageprojects.com/archery/recurve-bow.pdf
http://www.vintageprojects.com/archery/bow.pdf
http://www.renegadearchery.com/building ... ilding.htm

I'm sure there are more and can be adapted to materials available to you. You're crafty :) enough that I'm sure you can fashion one yourself. Come on, take this challenge a bit further and make one. Like Inder said, for your budget, or a bit more, you can go custom and still make out OK. Best of luck and let us know what you end up with.

BTW, Why recurve, why not long bow. I like the simplicity of the long bow.

Mack The Knife
We post a lot
We post a lot
Posts: 5775
Joined: Mon May 22, 2006 6:23 pm

Post by Mack The Knife » Mon Sep 15, 2008 12:38 am

ha ha more like you are going back to your second childhood, eh robin hood, ROTFL
I have yet to shed the first. ;) Douglas Fairbanks playing Robin Hood every Wednesday was THE television programme for us as kids.
can i join your marry band in tights? :D
Afraid not, old chap. You could try the Delhi Dahlings though.

Incidentally, I asked CC about the bows seen in his area but his de.scription is not the same.

Post Reply