Indians For Guns

Dear Both,
Would appreciate your advice about replaceing original sights for my 450/400 WJ Jefferey. if I could have sample pics or access to a site or maker who could make it for me.Looking for typical 3 leaf express sights, Gold vertical line from the v notch would be an added bonus!
Best
Axx

Asif, the current owners of the W.J.Jeffery & Co name are J.Roberts and Son. Paul Roberts would be able to make you replacement leafs with no problem.......wouldn`t be cheap though.
http://www.jroberts-gunmakers.co.uk/
As alternative would be to contact Peter Dyson -
http://www.peterdyson.co.uk/
He can make practically anything gun related. The only problem that I can see would be getting the original dimensions.
Hope this helps.

Grumpy, would Chambers in Scotland be cheaper? Assuming the owner is back on his feet.

Mack The Knife

I very much doubt it Mack The Knife. The best bet is Paul Roberts - he is pricey but is the most likely to have the required dimensions to hand. Peter Dyson is likely to be the best person to go to if the leaves have to be made from scratch without dimensions being available. His prices are reasonable ( ie NOT London prices ) and he can do precious metal inlays - and engrave numbers etc. If it was my rifle I`d speak to Peter first.
Surely there`s someone in India who can do the work ? If a pattern can be made up the leaves can be adjusted by filing down the bases to sight the gun in.......which`ll almost certainly have to be done whoever makes the leaves. I`ve found that jewellers are the best people to get small parts made up - they`re used to making and finishing small items.
Are the sights folding leaves or fixed ? If they are folding it will be a very expensive job to have done in the UK.

And Jefe,

You need an errand boy to run around, chase people,post things etc, I shall be happy to do that.Let me know.

Best-

Vikram

I happily second Grumpy's advice about talking to Paul Roberts. I have had some correspondence with him from the days when he owned Rigby and he is a fine gentleman. However, if the present sights are not damaged, they could most probably be replicated in India by any of the small CNC machining units around Delhi.

Asif, isn't it going to be possible to get a gold line inlaid on the present sights themselves? Might be a much cheaper solution...

You guys kill me, we live in different worlds!

Here, original and classic guns like these have much effort put into keeping everything as original as possible. However, I understand how your situation is much differnt than mine, and first and foremost you need to have functioning firearms however so.

Anyway, I would look into having a local machinist duplicate your sight or whatever parts it needs. It would most likely be the cheapest and best way.

Having said that , if you post a pic I can see what is available, but Mehul will have to say whether these would be a shippable and importable item.

Thanks Guys,
Will try Dyson as the leaves have to be made from scratch....Need to check out the slot dimension on the rib-later this month.The existing sights were added by my brother...not original.
Vikram, thanks for the very generous offer.Will definitely ask for help.
Best
Axx

Before you have someone make them, can you post a pic of what you have now, I have an awful lot of junk in my shop and can see if I have any extra leaves that may fit.

Thanks Mark,
Much appreciated.Called UK earlier today, looks like they're closed for the weekend.
Sure thing, will send you pics after 28th, as I'll be going over to Bangalore then.
Right now, my brother has retrofitted a set of 3 graded height,fixed blade sights on a single ramp.
Best
Axx

Hey Mark, got any spare Krieger barrels for an FN Mauser action laying about in your workshop that you want to give away ?
- What else have you got hanging around in there ?

Nope, the closest thing I have to your request is a Winchester Model 54 target barrel in 30-06 that's been re-threaded for a mauser action, will that work for you?

Glad you`re entering the spirit Mark. Best giggle I`ve had all week !
That barrel sounds like a Gun Parts special - I love their catalogue......full of stuff that you didn`t know you didn`t need - "Mauser 98 military barrels rebored to 9.5mm-06 with discontinuous barrel thread ( that fits no receiver known to mankind ) Only $29.99 - Buy quick, they`re selling fast` !!!
What`s the bet that someone`s going to tell me that there was a .375-06 wildcat now ? !

AAAHHH you're killing me!



I've had this barrel floating around for a while and don't really know what to do with it. I think some winter when I'm bored I might TIG the threads over and re-thread it for a winchester, or it may go on ebay next month too....

AAAAGH ! I knew it ! Had to be Townsend or P.O.Ackley. No. I`m not interested........Bet the specs are very much like the 9.3x62/9.3x74R. I had a massive correspondence with Ka`imiloa earlier this year about the problems of getting a .333 Jeffery built over here and he came up with a sensible alternative ( after initially suggesting the .35 Whelen ) - the .338-06. I was quite close to having a rifle built until it occurred to me that: a. If I was really interested I would be building it myself; b. That I`d have to reload.......and I hate reloading and c. The 9.3x62/74R is a very acceptable substitute.
The guy that I sold my Sabatti 9.3x74R O/U double to earlier this year has decided that he`s giving up shooting and has offered the rifle back to me at a stupid price - he hasn`t even shot the rifle...............I`m very tempted.
If you`re actually considering selling the 30-06 barrel I`ll bet that`s what you`ll do. Just like me, if you were really considering building the rifle you would have got on and done it - and you must have at least one 30-06 already.