IOF 30-06 Rifle
-
- Veteran
- Posts: 1526
- Joined: Tue Feb 26, 2008 1:11 pm
- Location: Fairbanks, Alaska
Re: IOF 30-06 Rifle
The .30-06 is the more powerful cartridge by about 10%. Both carry farther than you'd be able to see, much less hit anything.
As to "effective range", you first must define what you mean by that term; to what purpose you wish to put the rifle. Effective range is purely a military term, with each military having their own criteria, including complete penetration of the most likely opponent's helmet, and nowadays body armor, and the range at which the average soldier is likely to hit a man-sized target with the issue rifle and ball round.
As to "effective range", you first must define what you mean by that term; to what purpose you wish to put the rifle. Effective range is purely a military term, with each military having their own criteria, including complete penetration of the most likely opponent's helmet, and nowadays body armor, and the range at which the average soldier is likely to hit a man-sized target with the issue rifle and ball round.
- Chengy
- Almost at nirvana
- Posts: 116
- Joined: Tue Jul 28, 2015 11:56 am
- Location: Delhi
Re: IOF 30-06 Rifle
I have purchased the IOF 30-06 rifle and obtained a Vortex Diamondback scope for the rifle. But just cannot figure out how to mount it. The dovetail provided has no recoil pin holes in it. I'm sure a scope wouldn't maintain position after a couple of shots. The holes provided for the weaver bases to attach a weaver mount seems to be of some weird specification as the allen bolts normally used do not fit. I have a warne base for a Sauer 202 (on which the IOF rifle is patterned) and the bolts provided do not fit the holes on the IOF receiver. Any advice would be highly appreciated.
- AgentDoubleS
- Poster of the month - Apr 2015
- Posts: 630
- Joined: Sun Sep 17, 2006 9:12 pm
- Location: Here and there..
Re: IOF 30-06 Rifle
Here's a response I had posted a couple of pages back. You could alternatively get the holes drilled and tapped to 4mm.
AgentDoubleS wrote:Was copying this for a friend. Thought it might be useful here till the links are valid.
Here are things that one could get for the rifle.
Here is the list of things I got.
Recoil Pad (I got medium which was big- small SHOULD fit)
http://www.midwayusa.com/product/423006 ... dium-black
Mounts (screws will NOT fit. you will have to get 3 mm screws or get the reciever drilled for 4mm screws)
http://www.midwayusa.com/product/617227 ... -202-matte
Rings:
http://www.midwayusa.com/product/346104 ... tte-medium
-
- On the way to nirvana
- Posts: 83
- Joined: Fri May 06, 2016 10:18 am
Re: IOF 30-06 Rifle
Is this rifle good for first time buyer?
- Chengy
- Almost at nirvana
- Posts: 116
- Joined: Tue Jul 28, 2015 11:56 am
- Location: Delhi
Re: IOF 30-06 Rifle
Hi Shutzen,
I have purchased the IOF 30-06 rifle and its excellent for the price you pay. Only drawback is that it is light and therefore has a considerable recoil, which may be kept in mind if you are a first time buyer. Regards
I have purchased the IOF 30-06 rifle and its excellent for the price you pay. Only drawback is that it is light and therefore has a considerable recoil, which may be kept in mind if you are a first time buyer. Regards
-
- On the way to nirvana
- Posts: 83
- Joined: Fri May 06, 2016 10:18 am
Re: IOF 30-06 Rifle
@Chengy
can heavy barrel be installed on the IOF 30-06 rifle to reduce the recoil? Also how much does it costs to own one?
can heavy barrel be installed on the IOF 30-06 rifle to reduce the recoil? Also how much does it costs to own one?
-
- Veteran
- Posts: 1526
- Joined: Tue Feb 26, 2008 1:11 pm
- Location: Fairbanks, Alaska
Re: IOF 30-06 Rifle
Yes, a heavier barrel could be installed. Your closest gun store can tell you the cost to own one.
- nagarifle
- Old Timer
- Posts: 3404
- Joined: Sat Oct 06, 2007 1:43 pm
- Location: The Land of the Nagas
Re: IOF 30-06 Rifle
ha ha ha, love to see one.TwoRivers wrote:Yes, a heavier barrel could be installed. Your closest gun store can tell you the cost to own one.
Nagarifle
if you say it can not be done, then you are right, for you, it can not be done.
if you say it can not be done, then you are right, for you, it can not be done.
-
- Almost at nirvana
- Posts: 136
- Joined: Fri Oct 25, 2013 5:49 pm
Re: IOF 30-06 Rifle
How can the weight be increased while maintaining the balance? The recoil needs to dumbed down.
- Chengy
- Almost at nirvana
- Posts: 116
- Joined: Tue Jul 28, 2015 11:56 am
- Location: Delhi
Re: IOF 30-06 Rifle
AKS,
A heavier barrel would not be appropriate as the cost of machining and rifling would be prohibitive. You could possibly increase the weight by having a stock made out of denser wood like sheesham or teak. But the best way to reduce recoil would be to invest in a quality recoil pad, use ammunition of lesser grains if you could find it and hold the rifle properly against the shoulder.
regards
A heavier barrel would not be appropriate as the cost of machining and rifling would be prohibitive. You could possibly increase the weight by having a stock made out of denser wood like sheesham or teak. But the best way to reduce recoil would be to invest in a quality recoil pad, use ammunition of lesser grains if you could find it and hold the rifle properly against the shoulder.
regards
-
- Veteran
- Posts: 1526
- Joined: Tue Feb 26, 2008 1:11 pm
- Location: Fairbanks, Alaska
Re: IOF 30-06 Rifle
Actually, since the IOF rifle has the locking shoulders in the barrel itself, rather than the receiver, this would be near impossible. Though not in India, rifled barrels blanks are available, in all contours and shapes. So are muzzle brakes to reduce recoil, far more than a heavier barrel would. If you really want more weight, while maintaing the rifle's balance, the barrel can have a weight sleeved to the outside; and the butt stock can be bored out under the butt plate and lead weights added.
-
- One of Us (Nirvana)
- Posts: 422
- Joined: Sat Aug 28, 2010 3:03 pm
Re: IOF 30-06 Rifle
Can anyone help in procuring the sauer type long base that will fit the factory drilled holes in IOF 30-06 Rifle. Is there an Indian alternative?
- Chengy
- Almost at nirvana
- Posts: 116
- Joined: Tue Jul 28, 2015 11:56 am
- Location: Delhi
Re: IOF 30-06 Rifle
I have a pair with me. PM me for further details
Regards
Regards
- mundaire
- We post a lot
- Posts: 5410
- Joined: Mon May 22, 2006 5:53 pm
- Location: New Delhi, India
- Contact:
Re: IOF 30-06 Rifle
The felt recoil can be reduced substantially by getting a new stock made, where the drop to heel isn't as pronounced as the factory standard stock.
That said, I haven't found the standard factory stock to be unpleasant to shoot.
What are you comparing it with? A 22 rimfire or an airgun?!
Sent from my MotoG3 using Tapatalk
That said, I haven't found the standard factory stock to be unpleasant to shoot.
What are you comparing it with? A 22 rimfire or an airgun?!
Sent from my MotoG3 using Tapatalk
Like & share IndiansForGuns Facebook Page
Follow IndiansForGuns on Twitter
FIGHT FOR YOUR RIGHTS - JOIN NAGRI NOW!
www.gunowners.in
"Political tags - such as royalist, communist, democrat, populist, fascist, liberal, conservative, and so forth - are never basic criteria. The human race divides politically into those who want people to be controlled and those who have no such desire." -- Robert Heinlein
Follow IndiansForGuns on Twitter
FIGHT FOR YOUR RIGHTS - JOIN NAGRI NOW!
www.gunowners.in
"Political tags - such as royalist, communist, democrat, populist, fascist, liberal, conservative, and so forth - are never basic criteria. The human race divides politically into those who want people to be controlled and those who have no such desire." -- Robert Heinlein
-
- One of Us (Nirvana)
- Posts: 422
- Joined: Sat Aug 28, 2010 3:03 pm
Folding butt for 30-06 IOF,
Gun accessory, Amritsar has a folding butt stock for IOF 30-06 rifle, on its website. Has anybody bought and fitted it to their 30-06 iof rifle. Please post your opinion and experience.