Page 1 of 3
My IOF Modified 0.32 Pistol
Posted: Tue Sep 08, 2015 11:33 am
by nbk3y7k
IOF Modified :
1. No Change on Barrel
2. Lamma Type Look
3. Release button magazine
4. Ventilated Ribs
5. sleek and lighter model
6. External Hammer
IOF_IMG_1087.jpg
IOF_IMG_1086.jpg
Re: My IOF Modified 0.32 Pistol
Posted: Tue Sep 08, 2015 11:35 am
by marksman_dd
that's really cool mod you have,
does the slid remains back when the last shot is fired...
Re: My IOF Modified 0.32 Pistol
Posted: Tue Sep 08, 2015 11:37 am
by nbk3y7k
Yes, the slide remain back after the last shot.... this is not a feature of the unmodified ashani pistol.
Re: My IOF Modified 0.32 Pistol
Posted: Tue Sep 08, 2015 2:23 pm
by Walibaa
your ashani looks dope.
Looks like a llama llla.
How much did it cost you for the mod?
Your gunsmith seems professional in mods.
Share your experience with cost and time involved.
Re: My IOF Modified 0.32 Pistol
Posted: Tue Sep 08, 2015 5:34 pm
by nbk3y7k
Thanks. I purchased a modified one from Asian Armoury Bangalore. He has a gunsmith who does these types of modifications. May take 3-4 weeks for the modification.
Re: My IOF Modified 0.32 Pistol
Posted: Tue Sep 08, 2015 6:18 pm
by Walibaa
Asian armoury are professionals anyway can you shed some light on pricing? It will be helpful to others in case they want to get their pistol modified.
Re: My IOF Modified 0.32 Pistol
Posted: Tue Sep 08, 2015 6:38 pm
by Commonwealth_of_PA
I would buy that. I like .32, too. Some of the Indian civilian handguns are not very pretty but that one is a keeper! Very nice
What is hanging out of ejection port? Is that an extractor?
Re: My IOF Modified 0.32 Pistol
Posted: Tue Sep 08, 2015 8:08 pm
by nbk3y7k
No that not an extractor, its a iron ring for safety to tie a slim belt for additional safety when you carry. Helps from snatcher or accidental fall.
Added in 1 minute 20 seconds:
Walibaa wrote:Asian armoury are professionals anyway can you shed some light on pricing? It will be helpful to others in case they want to get their pistol modified.
Modification at his shop for an Indian pistol ranges from 50 K to 75K. Based on the type of modification required.
Re: My IOF Modified 0.32 Pistol
Posted: Wed Sep 09, 2015 6:32 pm
by nbk3y7k
Please contact Asian Armoury, Bangalore for more details
Re: My IOF Modified 0.32 Pistol
Posted: Mon Sep 14, 2015 11:16 pm
by dheeraj_1772
Very nice .... Marvellous job done... Just like DC for Ashani Pistols
Re: My IOF Modified 0.32 Pistol
Posted: Tue Sep 15, 2015 10:17 am
by ckkalyan
Nice work
nbk3y7k - rare to find such lovely workmanship- Enjoy!
Re: My IOF Modified 0.32 Pistol
Posted: Tue Sep 15, 2015 11:46 am
by brihacharan
Congrats!
Excellent modification Job....very talented gunsmith!!!
Briha
Re: My IOF Modified 0.32 Pistol
Posted: Wed Sep 16, 2015 8:11 am
by to_saptarshi
The frame and slide both has been changed . Are they allowed to do that ?
Re: My IOF Modified 0.32 Pistol
Posted: Mon Sep 21, 2015 10:53 am
by nbk3y7k
Yes its allowed.... except modification in barrel part....
Re: My IOF Modified 0.32 Pistol
Posted: Mon Sep 21, 2015 11:42 am
by ckkalyan
to_saptarshi wrote:The frame and slide both has been changed . Are they allowed to do that ?
I am guessing that almost any modification is legally possible because an Arms Licence usually mentions only DBBL or SBBL, NPB or PB (I think).
IIRC - There are no real, specific regulations on modifications, in the law. Over to
goodboy_mentor the resident expert on such matters!