My cz27 not firing

Posts related to handguns (pistols, revolvers)
Post Reply
indiarahu
Fresh on the boat
Fresh on the boat
Posts: 13
Joined: Fri Feb 10, 2012 11:45 pm
Location: kanpur

My cz27 not firing

Post by indiarahu » Mon Nov 04, 2013 8:32 am

Friends my cz27 pistol was not used for about 2 years (cleaning was done) not after loading it is not firing what to do. Any good gun smith at kanpur

For Advertising mail webmaster
surajshuresh
One of Us (Nirvana)
One of Us (Nirvana)
Posts: 278
Joined: Tue Nov 02, 2010 7:30 pm
Location: Bangalore

Re: My cz27 not firing

Post by surajshuresh » Mon Nov 04, 2013 11:11 am

Hi what is the problem can you explain please. Can you pull the trigger, is the primer struck...

TwoRivers
Veteran
Veteran
Posts: 1526
Joined: Tue Feb 26, 2008 1:11 pm
Location: Fairbanks, Alaska

Re: My cz27 not firing

Post by TwoRivers » Mon Nov 04, 2013 11:18 am

Does it have a magazine safety, and you have forgotten ? Put an EMPTY mag in the pistol and try again.

dr.jayakumar
Veteran
Veteran
Posts: 1906
Joined: Tue Apr 06, 2010 9:55 am
Location: tamilnadu,india

Re: My cz27 not firing

Post by dr.jayakumar » Mon Nov 04, 2013 1:18 pm

Did you clean the gun thoroughly?if not do so. firing pin with the spring may be stuck,double check.normally cz's don't give problems.
regards
dr.jk

winnie_the_pooh
Veteran
Veteran
Posts: 1767
Joined: Fri Aug 21, 2009 1:49 pm

Re: My cz27 not firing

Post by winnie_the_pooh » Mon Nov 04, 2013 4:15 pm

Might be a broken firing pin

indiarahu
Fresh on the boat
Fresh on the boat
Posts: 13
Joined: Fri Feb 10, 2012 11:45 pm
Location: kanpur

Re: My cz27 not firing

Post by indiarahu » Sun Nov 10, 2013 7:34 pm

the gun smith have changed firing pin and tension lever (kamani) now operating fine. Thanks

indiarahu
Fresh on the boat
Fresh on the boat
Posts: 13
Joined: Fri Feb 10, 2012 11:45 pm
Location: kanpur

Re: My cz27 not firing

Post by indiarahu » Sun Nov 10, 2013 7:40 pm

any suggestion for replacement
firing pin and tension lever for cock. As they were changed and now cz27 working fine.

Post Reply