My Experience Buying a PCP from on Line store
Posted: Mon Aug 24, 2020 12:09 pm
Hello Dear Members ! I thought it would benefit my fellow paasionates to share my experience Buying a New PCP from a One Line store in India. For the sake of civility I would be allowed to with-hold the Brand and the name of the one-line store.
After a detailed search based on my requirement and the cost calculation I orderED a Mid-range PCP in .177. As I am philosophically oriented to
"Small is Beautiful" I was thrilled with its cute look and synthetic stock and its weight being below 2.5 Kg. It is unregulated and is said to to give 20-25 consistent shot between 100- 200 bar. I happily mounted by Hakko 2-7-40 and began zeroing. It was grouping to the size of 1.5 inches at 15 yards. It was disappointing and a PCP of that Brand is not expected to perform that way. First I tried with the copper coated H&N 10 grain. Then tried Exact of 8 grain and other Ponyang all available good brand from my inventory. I was dismayed. Could not figure out why it was grouping that bad.
I was wondering could be the suppressor in the muzzle ? Then I checked the views of the experts on the effects of Suppressors in accuracy. 90 % of them expressed it won't affect accuracy and 10 % said it could have an effect on the accuracy. Then I removed suppressor and checked whether it could do some good. But it was no good. It was shooting the same in erratic pattern.
Besides the accuracy problem the air in the reservoir could not retain the pressure for a single night. It drained from 200 to 0 bar overnight. Worried and baffled, I spoke to the Sales Executive of the Online store. Deliberated all the problems I am facing with the PCP. He assured me to do all that would satisfy me and made arrangement to pick up the gun from me.
Before sending it back I just checked the barrel for any unusual thing. I could see a scratch like thing cutting the grooves 1.5 inches down the barrel from the muzzle. I informed this to the sale executive who assured that if that be the case he would arrange for a replacement.
A couple of week later I recieved a new replacement. I mounted the scope and started zeroing. It is shooting pellet on pellet in 15 yards in the same ambience in which I tried the 1st one. Now I am a happy owner of the cute baby which is going to be a constant in my armoury.
To my disappointment this new replacement also could not retain the air for a night.
Thoguh the online store could not be faulted for this it is my suggestion that before sending it to the buyer, the store could do some test firing with the expert available with them and check the air retained without fault in the reservoir. Since online store is a renowned one, to up-keep their name they can introduce this practice before sending it to the customer. Particularly this PCPs because the pivotol thing in PCPs is O rings which could have deterioted in the long time of storage and indian weather.
As the Rifle came with extra O rings I am getting it fixed by one of my friend who is doing it for his PCPs. As I am settled with its accuracy issue, I am not going to send it back again to the online store.
It is my intention here that the concerned people take notice of this and do still better service to the shooting community.
PRE CHECK BEFORE DISPATCH
After a detailed search based on my requirement and the cost calculation I orderED a Mid-range PCP in .177. As I am philosophically oriented to
"Small is Beautiful" I was thrilled with its cute look and synthetic stock and its weight being below 2.5 Kg. It is unregulated and is said to to give 20-25 consistent shot between 100- 200 bar. I happily mounted by Hakko 2-7-40 and began zeroing. It was grouping to the size of 1.5 inches at 15 yards. It was disappointing and a PCP of that Brand is not expected to perform that way. First I tried with the copper coated H&N 10 grain. Then tried Exact of 8 grain and other Ponyang all available good brand from my inventory. I was dismayed. Could not figure out why it was grouping that bad.I was wondering could be the suppressor in the muzzle ? Then I checked the views of the experts on the effects of Suppressors in accuracy. 90 % of them expressed it won't affect accuracy and 10 % said it could have an effect on the accuracy. Then I removed suppressor and checked whether it could do some good. But it was no good. It was shooting the same in erratic pattern.
Besides the accuracy problem the air in the reservoir could not retain the pressure for a single night. It drained from 200 to 0 bar overnight. Worried and baffled, I spoke to the Sales Executive of the Online store. Deliberated all the problems I am facing with the PCP. He assured me to do all that would satisfy me and made arrangement to pick up the gun from me.
Before sending it back I just checked the barrel for any unusual thing. I could see a scratch like thing cutting the grooves 1.5 inches down the barrel from the muzzle. I informed this to the sale executive who assured that if that be the case he would arrange for a replacement.
A couple of week later I recieved a new replacement. I mounted the scope and started zeroing. It is shooting pellet on pellet in 15 yards in the same ambience in which I tried the 1st one. Now I am a happy owner of the cute baby which is going to be a constant in my armoury.
To my disappointment this new replacement also could not retain the air for a night.
Thoguh the online store could not be faulted for this it is my suggestion that before sending it to the buyer, the store could do some test firing with the expert available with them and check the air retained without fault in the reservoir. Since online store is a renowned one, to up-keep their name they can introduce this practice before sending it to the customer. Particularly this PCPs because the pivotol thing in PCPs is O rings which could have deterioted in the long time of storage and indian weather.
As the Rifle came with extra O rings I am getting it fixed by one of my friend who is doing it for his PCPs. As I am settled with its accuracy issue, I am not going to send it back again to the online store.
It is my intention here that the concerned people take notice of this and do still better service to the shooting community.
PRE CHECK BEFORE DISPATCH